• 3 inputs (each with a volume control), and one 35W amplifier output channel
• Ideal for paging, background music, and music-on-hold
• Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
• Priority muting by VOX or external switch
• Bass and Treble controls on master output
• Minimum Guaranteed Power into 8 ohms or 70V/100V Output: 35W
• Frequency Response (at 1 watt from line out): 50Hz to 20kHz +/-1dB; 19Hz to 34kHz +0, -3dB
• Signal to Noise Ratio (ref. to rated power, master volume at minimum):
• Mic: > 58 dB.
• Line: > 60 dB.
• Telephone: > 60 dB.
• Inputs 2 or 3 (and 4 in 160MA): > 78 dB
• THD+N: <0.5% at rated power at 1kHz; 0.1 percent at 5W at 1kHz
• Input Sensitivity (for full output at maximum gain):
• Input 1: Mic 3mV, Line 800mV.
• Input 2: 400mV.
• Input 3: 400mV.
• Input Impedance (nominal):
• Mic: 2.2 kilohms.
• Line: 10 kilohms.
• RCA: 10 kilohms.
• Crosstalk: -82dB at 1kHz (Ch. 1 line input 0.8V, Ch. 1 volume at minimum, other channel volumes at maximum)
• Line Output Level (nominal): 1V into 10 kilohms
• Phantom Power: 15 VDC
• AC Line Voltages Available: Universal Power Supply. Line voltage tolerance +15 percent, -20 percent
• Operating Temperature/Humidity: 0° C to 40° C at 95% relative humidity (non-condensing).
• Storage Temperature: Storage Temperature: –20° C to 85° C.
• Cooling: Convection cooled.

Dimensions:

• Width: Half rack width 9.5 in.
• Height (front panel): 3.5 in.
• Height (including feet): 4.1 in.
• Depth (front panel to back panel): 12.2 in.
• Depth (front of knobs to back panel): 13.9 in.
• Weight: 8 lb 2 oz net, 10 lb 16 oz shipping

Front Panel Controls and Indicators

• Power Switch: Pushbutton on-off switch.Input Volume Controls: Four controls, one per input. Detented potentiometers with knobs.
• Tone Controls: Bass and Treble non-detented recessed potentiometers under master output volume control. Bass ±10 dB at 100 Hz, Treble ±10 dB at 10 kHz.
• Power Indicator: Blue LED indicates power on.
• Input Signal Presence Indicators: Green LED, one above each channel's input attenuator, illuminates when input signal exceeds –40 dBu.
• Input Signal Clip Indicators: Green LED, one above each channel's input attenuator, fl ashes brightly at threshold of audible distortion.
• Output Signal Presence Indicator: Green LED above master output volume control illuminates when any input signal exceeds –40 dBu.
• Output Signal Clip Indicators: Red LED above master output volume control fl ashes brightly at threshold of audible distortion.
• Master Output Volume Control: Detented potentiometer with knob.

Back Panel Controls, Connectors and Indicators

• AC Power Inlet: Detachable IEC accepts US or Euro style power cords.
• Amplifier Output Connector: 4-position terminal barrier block with COM (Common), 8 ohms, 70V and 100V terminals.
• Accepts up to 10 AWG terminal forks. Non-touch cover included.
• Preamp Line Out Connector: 3-pin balanced Phoenix-type for connection to external amplifiers. Level independent of master volume control.
• Input Connector 1: 5-terminal Phoenix connector. 3 terminals for balanced signal, 2 terminals for priority contact closure, which mutes other channels when DIP switch 3 is on
• Input Connector 2: Unbalanced line-level RCA-type connectors.
• Input Connector 3: Unbalanced line-level RCA-type connectors.
• Telephone (MOH) Output Connector: 4-terminal Phoenix connector (2 terminals for 1W output to 8-ohm speaker, 2 terminals for 600-ohm output to PBX music-on-hold port).
• MOH Level Control: Trim pot adjusts level for Music-On-Hold output from Telephone (MOH) Output Connector.
• Amp Configuration DIP Switch: DIP switch selection for multiple functions.
• 1. On: Sets CH1 to Mic Input. Off: Sets CH1 to Line Input.
• 2. On: Sets CH1 to Normal mode (no priority).
• 3. On: CH1 priority contact closure mutes other channels.
• 4. On: CH1 VOX mutes other channels by sensing signal through Input 1.
• 5. On: Routes CH1 to MOH output.
• 6. On: Routes CH2 to MOH output.
• 7. On: Routes CH3 to MOH output.
• 8. On: 15V phantom power.
• VOX Threshold: Trim pot controls how loud the voice on CH1 must be before muting other channels. Can be set for no muting.