Site Information

 Loading... Please wait...
  • Call us on 877-222-7457
  • My Account
  • Image 1

Rode Videomic-PRO DSLR Mic

Calculated at checkout(Free Ground Shipping Over $99.99 Lower 48 USA)

Product Description

This is the 2015 redesign of Rode's Videomic Pro with an ultra compact and lightweight design that's ideal for use with HDSLR cameras, camcorders, and audio recorders. The new Videomic Pro has a condenser that is broadcast-quality and the Ryolite shockmount and an upgraded capsule offering lower noise (14dB vs the original 20dB) and higher sensitivity, as well as increasing the volume of the foam windshield to maximize wind protection.  The condenser has a supercardioid pickup pattern that is designed to capture audio from the front , and to minimize pickup from both the sides and the rear. The Videomic Pro features an integrated shockmount and a windscreen help to minimize wind and handling noise. The rear of the mic features a 3-way level control that has -10dB, 0dB, and +20dB modes. You can minimize the impact of motor noise, low frequency hum, and other distractions with a 2-step high pass filter with 0 to 80Hz settings. The mic has a standard shoe, and ⅜” threaded mount so you can easily attach it to cameras and boom poles. The 3.5mm plug is compatible with a wide variety of different cameras and audio devices. The VideoMic Pro operates for up to 70 hours on a single 9V battery, allowing you to work in the field without constant replacements.

  • Integrated Ryolite shockmount and foam windscreen
  • Newly designed capsule offering lower noise than the previous version (14 dB v. 20 dB)
  • 3-way level control that offers -10dB, 0dB and +20dB modes
  • 2-step high pass filter with 0 and 80Hz settings
  • Standard camera shoe
  • 3/8" threaded mount
  • 1/8" (3.5mm) plug
  • Operates for up to 70 hours on a single 9V battery
  • Requires one 9V battery
  • 11.0" x 5.0" x 2.0"
  • 1 lb

Find Similar Products by Category